Latest News
-
Three-phase Sine Wave DC-AC Inverter Series
The OVX-6400 dc-ac inverter is engineered to operate over a wide input range and to protect loads at start-up and mid-power modes. The rail-certified products are available from specialist power company, Relec Electronics and are the first designed by Premium to operate straight from the high voltage catenary power line.
Read More -
Compact AC-DC Converters Meet The Need for Miniaturisation
The increase in IoT connected devices in the home, office and factory settings is driving demand for ever-smaller networked equipment (Miniaturisation). The LSxx-K3Bxx series from Mornsun, available from Relec Electronics, is ideal for space-constrained, budget conscious design projects.
Read More -
Mornsun’s DIN-rail portfolio enters a new phase
The new LI, LIT and LITF three-phase DIN-rail power supplies are specifically designed and engineered for applications which are powered from three-phase supplies, either in three-wire, two-phase (split phase), line to line or four-wire delta connected three-phase systems.
Read More -
A New Wave of EN60945 Compliant Monitors
The marine displays, manufactured by panel PC and industrial monitor specialist, Elgens, are certified to IEC60945 for marine applications. The wide variety available from Relec includes panel PCS, monitors and discrete TFT displays for maritime installations, such as pilot control panels, sonar systems, engine room monitors and passenger information systems in commercial vessels.
Read More -
One Stop Shop for EV Charger Control
Demand for electric vehicles is on the increase, but the market is ultimately going to be limited by the volume of charge stations available to the public. Electric Vehicle charge stations whilst themselves being very large power supplies, also contain a number of sub-circuits with require equally reliable and durable power conversion products. In this article, we take a close look at the types of charger on the market today, and the requirements for localised power within the overall system.
Read More -
LMF1000 Series, Compact, Powerful & Intelligent
Mornsun expands its range of ac dc converters from 15W to 1000W with the LMF1000 series, high power density, power factor corrected, enclosed PSUs, which are aimed at a variety of industrial & medical applications.
Read More -
K78-LB buck converters set new standards for cost vs performance
Relec Electronics is pleased to announce the introduction of K78xxJT-500R3-LB and K78xx-500R3-LB series switching regulators. Available as traditional 3 pin, through-hole packages, or compact surface mount (SMD), the LB series offers a step change drop in cost making them ideal for price-sensitive, high-volume applications.
Read More -
50155 Compliant Monitors help Realise the Future of Transportation
Artificial intelligence (AI) and the Internet of Things (IoT) are technologies increasingly being adopted within the railway industry. In this article we explain how EN50155 approved monitors can be simply and cost-effectively integrated into system design to enhance rail travel.
Read More -
9 Inch TFT Screens fill the gap perfectly
Equipment manufacturers looking for midsized wide screen displays are currently limited to either 7” displays, or if the 7” does not provide the level of active area required, moving up to a larger 10” unit with the associated added cost. Relec Electronics are pleased to announce the general availability of 3 new TFT displays in a 9” footprint with Wide screen 16:9 aspect ratios.
Read More -
LO45/LO65 Series 60601 Approved with 5-Year Warranty
Mornsun continues to expand its range of EN60601 approved medical power supplies with the addition of the LO45 and LO65 series ac dc converters. The LO45 and LO65 continue Mornsun’s tradition of offering high-specification power supplies at low cost and with short lead-times.
Read More -
IP66 / IP69K Sealed Monitors from Wincomm
We are delighted to be able to introduce a new range of fully sealed industrial-grade stainless steel monitors which are designed for the most challenging environments. All of the models in the stainless steel WTD series are sealed to a minimum of IP66 standards, with units available up to IP69K for applications like food processing, where hygiene and cleanliness are paramount, and equipment must be able to withstand rigorous high pressure, high-temperature wash-down procedures.
Read More -
How to take TFT glare out of the spotlight
We all spend huge parts of our lives now in front of TFT displays, be they our office workstations, mobile phones, checkout terminals, or even the humble television set. The majority of these have one thing in common; we use them indoors. Using a TFT display outside though brings a new set of challenges, especially in direct sunlight where the glare created from direct sunlight can make TFT display very difficult to read. This article takes a short look at 2 techniques to make TFT displays more readable in bright conditions.
Read More
LET’S MAKE THIS EASY. CALL 01929 555 700
why choose relec?
-
Faster
Our aim is to get back to you with an initial response within the hour.
-
Attention to detail
We pride ourselves on getting you the right product, at the right price and on time.
-
New ideas
We are constantly looking for latest technology and products for your applications.
-
Beyond standard
It’s not just about the product. Our service goes way beyond the norm.
-
Easy
We want to make your life as simple as it can be. Call us to find out what we can offer.
