Input: 115 to 227Vac
Output: 27.5 to 28.8Vdc – 10A
Power: 240 Watt (Charge)
Tamb: -25 to 70°C
Dims: 100 x 115 x 135 mm
Conforms to: IEC/EN 60335-2-29, EN60950 / UL60950-1, EN54-4 (fire detection)
Make an Enquiry
Request a Sample
The CB series battery chargers are the result of years of development by ADEL System. They use an advanced multi-stage switching technology and a Battery Care philosophy to provide optimised battery charging that is completely automatic and meets the most demanding requirements of battery manufacturers.
The Battery Care concept is based on algorithms that implement rapid and automatic charging, battery charge optimization over time, flat battery recovery, and real-time diagnostics during installation and operation. The real-time Auto diagnostic system monitors battery faults such as short circuits, reverse polarity connections, and battery disconnections. These faults can be easily detected and corrected using the Blink Code of Diagnosis Led.
Each CB series charger is suited for all battery types. By means of jumpers, it is possible to set predefined curves for open lead acid, sealed lead acid, gel, and Ni-Cd batteries (optional). The chargers are programmed for two charging levels: boost and trickle. A rugged casing with bracket for DIN rail mounting provides IP20 protection.
Here are some of the key features of the CB series battery chargers:
- Switching technology for efficient and fast charging
- Battery Care philosophy for optimal battery performance
- Real-time Auto diagnostic system for fault detection
- Suitability for all battery types
- Boost and trickle charging levels
- Rugged casing with DIN rail mounting
Input: Single-phase 115 ÷ 277 Vac
Output: Battery charging 27.5Vdc (trickle charge) to 28.8Vdc (boost charge) – 10A
Suited for the following battery types: Open Lead
Acid, Sealed Lead Acid, lead Gel and Ni-Cd (Automatic diagnostic of battery status.
Charging curve IUoUo, constant voltage and current)
Switching technology, output voltage 28.8 Vdc
Three charging levels: Boost, Trickle, Recovery.
Protected against short circuit, inverted polarity & overload.
Signal output (contact free) for fault battery fault status
Protection degree IP20 - DIN rail
|115 to 227Vac
|24Vdc – 10A
Click on the link below for an instant download.
We would love to know more about the problem you are trying to solve
Our experts are on hand to help you find the best solution!
LET’S MAKE THIS EASY. CALL 01929 555 700
why choose relec?
Our aim is to get back to you with an initial response within the hour.
Attention to detail
We pride ourselves on getting you the right product, at the right price and on time.
We are constantly looking for latest technology and products for your applications.
It’s not just about the product. Our service goes way beyond the norm.
We want to make your life as simple as it can be. Call us to find out what we can offer.
sign up for our newsletter
Enter your email address below