LET’S MAKE THIS EASY. CALL 01929 555 700

OCP Power for Data Centres

Relec Electronics are pleased to announce the introduction of a range of rack mounted power solutions meeting the requirements set by the Open Compute project (OCP).  Our power-shelf solutions provide rectification, system management, and power distribution, while maintaining high reliability and offering flexibility for future expansion.

The Open Compute Project (OCP) was launched in 2011, with the aim to accelerate the development of hardware designs that enable greater data center efficiency and flexibility. Since then, the OCP has gained traction in the market, growing into an influential community focused on open data center hardware.

The OCP Rack and Power definitions went beyond rack dimensions. The specification unbundles the traditional server configuration, deploying servers, storage and power on separate trays within the rack, providing greater flexibility in configuring racks with required equipment.

The OCP specification supports 13.2 kW of IT equipment within the rack. This is accomplished through the use of two power shelves within the rack, each of which consists of three power supplies in an N + 1 configuration. Power shelves can also include “smart boxes” which archive data in the event of a failure for diagnostics.

Higher density shelves can now be deployed without compromising efficiency, even if the initial capacity of the rack is well below the design specification. The power supplies shpwn below have a maximally flat efficiency curve across the load range. The efficiency curves also highlight the differences between Platinum and Titanium power supplies.

Titanium power supplies provide efficiency improvements at certain points of the curve. The efficiency of Platinum power supplies may provide improvements at other points, such as light and full loading.

The products highlighted below are a small selection of the solutions we can offer here at Relec.  Our technical team are standing by to take your call and provide you with the optimum OCP power solution.

READ MOREREAD LESS
  • TET2200 series

    Input: 90 - 180 VAC/180 - 264 VAC
    Outputs: 12V dc
    Power: 1200/2200W
    Tamb: 0 to +55°C
    Dims: 195 x 86 x 40.0 mm
    Titanium efficiency / Best in class
    Made in Slovakia

  • TET2500 series

    Input: 90 - 180 VAC/180 - 264 VAC
    Outputs: 12V dc
    Power: 3000W
    Tamb: 0 to +50°C
    Dims: 195 x 86 x 40.0 mm
    Titanium efficiency / Best in class
    Made in Slovakia

  • PFE3000 Series

    Input: 100-300Vac
    Outputs: 12V or 360V dc
    Power: 3000W
    Tamb: 0 to +45°C
    Dims: 603.7 x 69 x 42 mm
    Platinum efficiency / OCP Compatible
    Made in Slovakia

  • TET3000 series

    Input: 90-300Vac
    Outputs: 12V dc
    Power: 3000W
    Tamb: 0 to +50°C
    Dims: 583 x 69 x 40.5 mm
    Titanium efficiency / Best in class
    Made in Slovakia

  • TET4000 series

    Input: 90-300Vac
    Outputs: 48V dc
    Power: 4000W
    Tamb: 0 to +50°C
    Dims: 530 x 69 x 40.6 mm
    Titanium efficiency / Best in class 98%
    Made in Slovakia

  • SPSTET4 series

    Input: , 200-277 / 346-480 VAC
    Outputs: 48V dc
    Power: 19260W
    Tamb: 0 to +45°C
    Dims: 47 x 535 x 600mm
    Made in Slovakia

  • SPSPFE3 series

    Input: 400-480Vac
    Outputs: 12V dc
    Power: 14400W
    Tamb: 0 to +45°C
    Dims: 47 x 535 x 860mm
    Platinum efficiency / OCP Compatible
    Made in Slovakia

LET’S MAKE THIS EASY. CALL 01929 555 700

why choose relec?
  • Faster

    Our aim is to get back to you with an initial response within the hour.

  • Attention to detail

    We pride ourselves on getting you the right product, at the right price and on time.

  • New ideas

    We are constantly looking for latest technology and products for your applications.

  • Beyond standard

    It’s not just about the product.  Our service goes way beyond the norm.

  • Easy

    We want to make your life as simple as it can be. Call us to find out what we can offer.

sign up for our newsletter

Enter your email address below

  • This field is for validation purposes and should be left unchanged.