Input: 12 to 168Vdc
Outputs: 12 to 96V
Power: 288 Watt
Tamb: -40 to +70°C
Dims: 168 x 111 x 80mm (3U x 16TE)
UL / CE EN60950 Approved
5 Year Warranty
The Network Rail Approved Melcher HR series of DC-DC Converters by Bel Power, represents versatile power supplies ideally suitable for use in transportation and other advanced electronic systems.
Features include a very broad input voltage range, very high efficiency, high reliability, low output voltage noise, and excellent dynamic response to load/line changes. They can be connected to all conventional railway batteries.
The converter inputs are protected against surges and transients. An input over- and undervoltage lockout circuitry disables the outputs if the input voltage is outside of the specified range. To avoid high input current at operation with high-voltage batteries, the inhibit input allows for adjusting of the undervoltage lockout to a suitable level, thus allowing the use of an appropriate input fuse.
The converters exhibit an inrush current limiter, preventing circuit breakers and fuses from tripping at switch-on.
The outputs are open- and short-circuit proof.
Full input-to-output, input-to-case, output-to-case, and outputto output isolation is provided.The converters are particulary suitable for railway applications and can be supplied by all common railway batteries of 24V, 36V, 48V, 72V, 96V, 110V, and 120V nominal voltage. The converters comply with EN 50155 and EN 50121-3-2. All boards are coated with a protective lacquer.
The case design allows operation at nominal load up to 71°C with natural cooling. If forced cooling is provided, the ambient temperature may exceed 71°C, but the case temperature must remain below 95°C.
A temperature sensor generates an inhibit signal, which disables the outputs when the case temperature TC exceeds the limit. The outputs are automatically re-enabled when the temperature drops below the limit.
LED indicators display the status of the converter and allow for visual monitoring of the system at any time.
The converters may either be plugged into a 19″ rack system according to IEC 60297-3, or be chassis mounted. Two heat sinks of different size and cooling plates for chassis mounting (option B, B1) are available.
Extremely Wide-Input Voltage range from 12 to 168Vdc in the same model
Network Rail Approved
Class I Equipment
Input over- and Programmable Undervoltage Lockout
Inrush Current Limitation
10 ms hold-up time
Adjustable Output Voltages
2 independent, Isolated Outputs: No Load, Overload, & Short-Circuit Proof
Rectangular current limiting characteristic
Parallel operation with active current sharing
Very High Efficiency up to 94%
Immunity according to IEC 61000-4-2, -3, -4, -5, -6
AllPCBs protected by lacquer
Very High Reliability
5 year warranty
|MODEL NUMBER||INPUT RANGE||OUTPUT||POWER|
Click on the link below for an instant download.
LET’S MAKE THIS EASY. CALL 01929 555 700
why choose relec?
Our aim is to get back to you with an initial response within the hour.
Attention to detail
We pride ourselves on getting you the right product, at the right price and on time.
We are constantly looking for latest technology and products for your applications.
It’s not just about the product. Our service goes way beyond the norm.
We want to make your life as simple as it can be. Call us to find out what we can offer.