Tel: +44 (0) 1929 555700
or Contact us here
Relec Electronics offer a wide variety of different format DC DC point of load converter (POLS) for a variety of different applications. Point of load (POL) converters are the ideal solution for providing tightly regulated supply voltage for individual ICs, circuits or sub assemblies, where a separate bus voltage is available elsewhere. We have products available covering inputs up to 14V DC. Point of load converters (POLs) ensure that voltage drops in cables and PCB copper do not have a detrimental effect on the performance of the circuit in hand. The formats below should fulfil your requirements, but feel free to Contact our Expert Technical Team for any extra information.
|Power-one's analogue point of load converters (POLS) are available in both DOSA compliant SMD and vertical mount through hole footprint products. Modules are stocked with 5V and 12V inputs and can be programmed for outputs from 0.6V to 3.3V up to 20A|
|Highly sophisticated point of load converters (POLS) which allow full control over parameters such as frequency synchronisation, phase interleaving, sequencing & feedback loop compensation. Units are available from stock in both programmable and No-Bus solutions.|
|Industry standard footprint switching converters which offer a highly efficient alternative to 78 Series linear regulators (LDOs) with input voltages up to 72V DC. Units are available in 500mA, 1A, 1.5A and 2A versions as through hole or surface mount options.|