|
|
- Next generation No-Bus digital POLs
- 8V - 14V Input voltage range
- Programmable feedback loop compensation
- Sequencing and cascade operating modes
- Fully programmable outputs with margin facility
|
 |
|
RoHS lead free and lead-solder-exempt products are available
Wide input voltage range: 8V - 14V
High continuous output current: 10A
Wide programmable output voltage range: 0.5V - 5.5V
Output voltage margining
Overcurrent and overtemperature protections
Overvoltage and undervoltage protections, and Power Good signal tracking the output voltage setpoint
Tracking during turn-on and turn-off with guaranteed slew rates
Sequenced and cascaded modes of operation
Single-wire line for frequency synchronization between multiple POLs
Programmable feedback loop compensation
Enable control
Flexible fault management and propagation
Start-up into the load pre-biased up to 100%
Current sink capability
Industry standard size through-hole single-in-line package: 1.2” x 0.26”
Low height of 0.84”
Wide operating temperature range: 0 to 70ºC
UL60950 recognized, CSA C22.2 No. 60950-00 certified, and TUV EN60950-1:2001 certified (pending)
|
Applications
Low voltage, high density systems with Intermediate Bus Architectures (IBA)
Point-of-load regulators for high performance DSP, FPGA, ASIC, and microprocessor applications
Industrial computing, servers, and storage
Broadband, networking, optical, and wireless communications systems
Active memory bus terminators
Benefits
Integrates digital power conversion with intelligent power management
Eliminates the need for external power management components and communication bus
Completely programmable via pin strapping and one external resistor
One part that covers all applications
Reduces board space, system cost and complexity, and time to market
|
| Power-One’s point-of-load converters are recommended for use with regulated bus converters in an Intermediate Bus Architecture (IBA). The ZY2110G is an intelligent, fully programmable step-down point-of-load DC-DC module integrating digital power conversion and power management. The ZY2110G completely eliminates the need for external components for sequencing, tracking, protection, monitoring, and reporting. Performance parameters of the ZY2110G are programmable by pin strapping and an external resistor and can be changed by the user at any time during product development and service without a need for a communication bus.. |
|
|
|
|
|
