|
|
|
Universal Mains Input
AC DC POE system
600W AC DC Rack Mount Converters
0°C to +70°C Operation
Internal Fan Cooled
1U or 3U Height Configurations
|
|
| Part Number |
Input Range |
Vout (VDC) |
Iout (A) |
Output Power |
| PALS400-2482 |
90 - 265 VAC |
48V
12V |
8A
16A |
400W |
| PALS600-2482 |
90 - 265 VAC |
48V
12V |
9A
16A |
600W |
|
RoHS lead free solder and lead solder exempted products are available
Single-phase AC input
Up to 9 W/in3 power density
1U or 3U height configurations
Power Factor Correction (PFC) Meets EN61000-3-2
Current share with ORing diodes
Overtemperature, overload, and overvoltage protection
Power supply status indicators
I2C protocol alarms, status, & control
Standby voltage - 12 VDC @ 500 mA with ORing diode
Enable signal for each output |
The PALS Series consists of 400 and 600 watt ac-dc power supplies designed specifically for use in power-over-ethernet applications. The supplies have dual outputs of 48 and 12 volts which provide LAN port and internal system power. A 500 mA standby output facilitates I2C interface operations. The units are fully-enclosed, have 1500 VAC (2250 VDC) output isolation, and comply to IEEE802.3AF.
The PALS Series provides excellent protection against input voltage transients. Supply outputs are fully floating, meaning that users can use them for either positive or negative polarity needs.
Output voltage terminals and interface access is through a hot-swap connector at the rear of the supply. The AC input fans, handle, and LED indicator lights are located on the front panel of the supply. Airflow is from the front through the rear. Alarm, monitoring, and control signals are floating from the rear output and can be referenced.
The PALS Series meets international safety requirements and is CE Marked to the Low Voltage Directive. |
|
| |
| |
| |
|
|
|
|
|
