 |
EN5394QI - 9 Amp "Feature Rich" Buck Converter with Integrated Inductor
|
Product Highlights
- Tiny Footprint setting a new standard for power density
- Simple Layout, Easy Design
- Low Part Count
- Excellent Transient Response
|
 |
|
Features
- Integrated Inductor
- Outstanding Power Density
- 2.375V to 5.5V input range
- 93% Peak efficiency
- Output voltage margining
- 4MHz operating frequency with the ability to synchronize to an external system clock or other EN5394QIs
- Monotonic output voltage ramp during start-up with pre-bias loads
- Programmable phase delay for lower input and output voltage ripple
- Master/Slave configuration for paralleling up to four EN5394QIs for greater power output
- Precision Enable pin for accurate sequencing of power converters
- Power OK signal
- 8 mm x 11 mm x 1.85 mm QFN package
- Fully RoHS compliant and Pb-free manufacturing line compatible
|
|
The Enpirion EN5394QI represents a revolution in low-power switching regulators. The total solution footprint is 190 mm2, without compromising efficiency. It has a feature rich set to facilitate ease of use in systems that are sensitive to beat tones. Requiring as little as little as seven external components, the EN5394QI makes regulator design a breeze.
A complete power system on a chip (PwrSoC), the EN5394QI integrates power switches, Inductor, gate drive, controller, and loop compensation in a tiny 8 mm x 11 mm package. The 1.85 mm profile and small footprint enables the use of this part where space is at a premium.
The EN5394QI utilizes an external resistor divider to set the output voltage to any user defined value. In addition, the EN5394QI is pin compatible with the 6A EN5364QI, therefore if your power requirements should decrease, the transition to the lower power EN5364QI will be seamless.
Contact us for further technical information or application assistance, or check our Enpirion stock listing page for up to date stock information. | 
